MOPAR 2461365 Bumper Bracket Mount Brace Lh 65CW1-1B9-LE

( Brand: Mopar ), ( Manufacturer Part Number: 2461365 ), ( Part Type: Bracket Bumper Mount ), ( Placement On Vehicle: Front ), ( Surface Finish: Original Oem Mopar Part ), ( Country/region Of Manufacture: United States )

Review MOPAR Bumper Bracket Mount Brace Lh Chrysler fits 1965

The Mopar 65cw1-1b9-le Bumper Bracket Mount Brace, LH (Left Hand), for 1965 Chrysler models is a crucial component designed to enhance the structural integrity of your vehicle's bumper. This high-quality part is engineered to fit perfectly with 1965 Chrysler models, ensuring a seamless integration with your car's original bumper system.

The Bumper Bracket Mount Brace is made from robust and durable materials, ensuring its ability to withstand the rigors of daily use and the elements. Its design is both functional and aesthetically pleasing, blending seamlessly with the overall look of your 1965 Chrysler.

This Bumper Bracket Mount Brace is specifically designed for the left side of the vehicle, ensuring a secure and proper fit. It is a direct replacement for the original part, making installation a straightforward process. The package includes the mount brace itself, making it a complete solution for your vehicle's repair or upgrade needs.

By investing in this Mopar Bumper Bracket Mount Brace, you are not only ensuring the safety and functionality of your vehicle but also enhancing its value. This part is a testament to Mopar's commitment to providing high-quality components that meet the exacting standards of Chrysler vehicles.

In conclusion, the Mopar 65cw1-1b9-le Bumper Bracket Mount Brace, LH (Left Hand), for 1965 Chrysler models is a must-have accessory for any enthusiast or owner of a classic Chrysler. Its durability, functionality, and fit guarantee a reliable and long-lasting solution for your vehicle's bumper system.

1. Enhanced Safety: This Mopar part is designed to reinforce the bumper bracket, providing additional support and stability to your 1965 Chrysler. This can help prevent damage to the bumper and other components in the event of an accident.

2. Durability: Mopar parts are known for their high-quality materials and construction, ensuring that this brace will last a long time and withstand regular use.

3. Easy Installation: The mount brace is designed to be easy to install, and it comes with clear instructions to guide you through the process.

4. OEM Compatibility: As this is an original equipment manufacturer (OEM) part, it is specifically designed for your 1965 Chrysler, ensuring a perfect fit and function.

1. Cost: Mopar parts can be more expensive than aftermarket alternatives. However, the increased durability and OEM compatibility can offset the initial cost in the long run.

2. Availability: Due to its specificity, this part may not be readily available at local auto parts stores. You may need to order it online or from a specialty dealer.

3. Replacement Cost: If damaged, this part may need to be replaced, which could incur additional costs.

While the 65CW1-1B9-LE Bumper Bracket Mount Brace LH 1965 Chrysler has a higher initial cost compared to some aftermarket alternatives, its durability, OEM compatibility, and ease of installation can make it a worthwhile investment for the long-term safety and performance of your 1965 Chrysler. It is recommended to consider the pros and cons and weigh them against your personal needs and budget before making a purchase decision.

Details:

Engine assembly mounts oil cooler parts, misc. Apps and very limiting do not show all the info that is usually viewed by a person at home computer.

Safely wrapped box shipping size is 23.

Bumper bracket mount brace - lh Chrysler 65CW1-1B9-LE this offer listing is for: a driver side from 1965. Fed ex smart post and regular ground or home service.

This allows you to choose the cheapest shipping cost.

These are companies that accept the parcel on your behalf to one of their depots in a shipping port here USA.

If the pricing is not correct for shipping please a price quote.

Brake parts, misc.

Axle shaft spindle knuckle, stub, rear suspension strut back glass regulator backing plate, backup lamp bell housing belt pensioner blower motor body parts, misc.

Courier fee added to bus shipping cost pay for the transport from Orville Wenatchee depot by. Interior sun visor jack tool kit license lamp misc. This usually includes USPS and fed-ex for heavy items smaller its best to go in a flat rate medium or large box.

To obtain a bunch of quotes from different carriers at one time.

All our listings from this point downward are the same:attention.

Rear brake proportioning valve brakes, braking, assembly, Assam, Assam end cap guard, reinforcement, bumper valance, cab clip carburetor pillar clock clutch master cylinder complete vehicles for sale console cowl vent panel crank cam angle sensor crankshaft cruise speed regulator block head dash assembly wiring harness deck lid tailgate distributor side, back handle outer hinge, lock solenoid molding, mirror window regulator, crank, motor erg maintenance reminder electric seat belt track electrical parts, misc.

Large item shipping within USA that are too big for postal service: it is usually cheapest to ship these items by fed-ex ground or bus.

Items like this are usually engines, axles, major large body sections. On the see details beside shipping price, or tab to different prices.

Body wiring harness brake anti lock parts caliper master cylinder parts, misc.

For example, if you live in Sweden. Cut off time is the day before at 5:00pm pacific. Or near Oslo's BC on Canadian side of the border.

Our time zone is pacific. Application - fits: Chrysler: 1965 Newport, Newark, 3 town and country-wagon Windsor Canadian model convertible 2dr coupe 4dr hardtop sedan wagon if you are sitting in the car this would be located: front driver side lh exterior part number on part: cosmetic condition out of 10: 7.

The container is full of other peoples items as well. The bus has a 100lb and 82 inch longest side maximum. You can on hose to narrow down searches by main types.

Lower down in the listing on your phone or app see details to all pictures and info about parts. Steering wheel sun roof motor panel suspension compressor x member k-frame tail finish gate molding lamp tailgate front deck lid temperature control throttle body valve assembly timing cover tire top section, rear torque converter transfer case transmission module trans axle trim panel, door trunk turbocharger supercharger vacuum pump water rim bearing, window defogger, washer motor, windshield frame reservoir wiper arm wire harness, moulding carpet headliner dash bezel ashtray glove box shiftier emergency brake e-brake glove box dome light clip bows trims a pillar cut air bag detector cleaner conditioner clutch condenser evaporator hoses wiring harness flow meter injection alternator automatic oil cooler axle assembly, 4wd carrier coil spring arm, lower Dana spicier corp Wagner Borg Warner upper drive shaft, hub outer locking independent leaf spring, loaded beam, 2wd parts, misc.

Handling costs.

Canadian buyers.

Things like bumpers, fenders, trunk lids, etc. Electrical switch panel switch, column electronic chassis control modules engine module parts, misc. Slower most economical cheapest service for items within these sizes.

part #: 2461365 prices

• $160.00-$200.00

specifications vintagecarbumperus:

• for makes: Chrysler, Mopar
• for years: 1965
• brand: Mopar
• mpn: 2461365
• part type: Bracket Bumper Mount
• placement on vehicle: Front
• surface finish: Original Oem Mopar Part
• country/region of manufacture: United States

General vintagecarbumperus:

• condition: Used
• Exterior > Bumpers
• in stock: Yes

Shipping vintagecarbumperus:

• type: Calculated
• handling: 5 days

Returns vintagecarbumperus:

• policy: no returns

Ratings:

1. Positive transaction 10-12-18
2. Good quality ,A fast shipping 10-13-18
3. Great product!! Great seller!! A 10-14-18
4. Great seller quick shipping part is just as listed 10-12-18
5. packaged nice, shiping fast. 10-13-18

Seller vintagecarbumperus:

• city: Oroville, Washington
• zipcode: 98844
• # feedbacks 10-15-18: 8629
• rating 10-15-18: 100.0%

Offer vintagecarbumperus:

• bids: 0
• Started: October 14, 2018, 9:48 pm
• Sold: 0
• quantity: 1
• best offer: false

Payments vintagecarbumperus:

• PayPal

Mopar 2461365 Is Similar To:

• 2486749 Mopar 1960s Chrysler Dodge Plymouth (39.6% similar) Marked Mopar on the Berkshires, dodge and Plymouth manual tail gate window crank...(February 26th, 2017)
• 00000000 Mopar 1960 Plymouth Rear Bumper (28.3% similar) They are only surface scratches. The driver side has some surface scratches. They are not relates. The passenger side is very nice. They are nos factory parts. This is an original pair of rear bumper ends for the 1960 Plymouth all model's except station wagons. They have not gouged through the ...(February 12th, 2017)
• Original Rare Trunk 114188-114189 Hinges Mopar Chrome Pair Chrysler Locking (33.1% similar) These are a right left side in good shape as shown no breaks part. Buying a nice pair key cylinder missing in one hinge and no keys...(August 6th, 2014)
• Front Guard Left Mopar Nos Rear Desoto Pt 1949-50 Bumper 1142188 (23.9% similar) Never a charge for packing or handling. Please see photo's. Actual shipping cost. Not perfect. No reserve but great driver condition...(January 12th, 2015)
• 1180 Rmas Mopar Front Bumper (35% similar) New chrysler, dodge or Plymouth front bumper bracket bolts. Item fits some b and all e body vehicles. Freezing the USA. Bolts can also be used on some Mopar b bodies. Bolts are oe correct for all Mopar e bodies cuds and challengers x qty 4 made in the USA...(April 18th, 2017)
• Guard Classic 1199-65p Bumper Mopar Pg 1963-65 Cushions Plymouth (31% similar) Sold as a pair. Replace your old, damaged or missing bumper guard cushions with our reproductions. All claims for shortages must be made within 48 hours...(August 13th, 2014)
• Pads 1199-66set Charger Rear Front Mopar Classic 1966 Pg Guards Bumper (24.6% similar) Sold as a pair. All claims for shortages must be made within 48 hours. Bumper guards come with rubber cushions...(September 19th, 2014)
• 1199-66pset Pg Classic Mopar 1966 Charger Front Rear Bumper Guard Rubber Pads (32.6% similar) All claims for shortages must be made within 48 hours...(May 21st, 2016)
• 1199-66r Pg Classic Mopar 1966 Charger Rear Bumper Guards With Pads (37% similar) All claims for shortages must be made within 48 hours. Sold as a pair. Bumper guards come with rubber cushions...(January 4th, 2016)
• Nos Bumper Coronet 1254080 Deflector Rear Dodge Stone 1949 Mopar D30 (30% similar) If there are any questions, please m f 11AM 6PM est at. New, never installed, original nos Mopar rear bumper stone deflector part made in USA. After these hours, leave a message at only fits 1949 dodge coronet 4 door sedan, 2 door club coupe and convertible model's...(February 2nd, 2015)
• 1314668 Plymouth Mopar Chrysler Products (39.1% similar) Great shape for a driving car. Light surface rust on back side, but nothing serious. A few small patches of failing chrome on top edge light discoloration around couple bolt holes. Condition: just unwrapped from Mopar factory wrapping paper. Nice shiny chrome. Contact prior to purchase for local ...(August 12th, 2017)