CHEVROLET 3907656 Front Bumper Bar Lower General 68CC1-1B2-B

( Manufacturer Part Number: 3907656 ), ( Part Type: Bumper Bar Motor ), ( Placement On Vehicle: Front ), ( Surface Finish: Original Oem Gm Parts ), ( Country/region Of Manufacture: United States )

Review CHEVROLET Front Bumper Bar Full Size General Motors fits 1968

The 68cc1-1b2 Front Bumper Bar for the 1968 Chevrolet is an essential upgrade for any classic car enthusiast. This high-quality bumper bar is meticulously crafted to provide both functionality and style, perfectly embodying the spirit of the iconic 1968 Chevrolet.

Constructed from durable materials, this bumper bar boasts a robust design that can withstand the rigors of everyday use. Its finish is a seamless blend of vintage charm and modern durability, ensuring it will not only look great on your car but also stand the test of time.

The 68cc1-1b2 Front Bumper Bar is a direct fit, making installation a breeze. It is specifically designed to fit perfectly with your 1968 Chevrolet, ensuring a secure and snug fit. The bar's dimensions are 68 inches in length, 1.5 inches in height, and 1.5 inches in width, making it a perfect match for your vehicle.

This bumper bar is not just a replacement part, but a statement piece that will instantly elevate the look of your 1968 Chevrolet. It is the perfect way to restore your classic car to its former glory or give it a fresh, updated look.

In conclusion, the 68cc1-1b2 Front Bumper Bar is a must-have for any 1968 Chevrolet owner. Its durability, functionality, and classic design make it an invaluable addition to your vehicle. With this bumper bar, you can drive your 1968 Chevrolet with confidence and pride.

1. OEM (Original Equipment Manufacturer) part: This bumper bar is a direct replacement for the original bumper on your 1968 Chevrolet, ensuring a perfect fit and maintaining the original look of your vehicle.

2. Durable and long-lasting: Made from high-quality materials, this bumper bar should withstand the test of time, protecting your car from minor impacts and damage.

3. Easy to install: The bumper bar is typically a straightforward installation process, often requiring only basic tools and some time to complete.

1. Cost: Replacement parts, especially OEM, can sometimes be more expensive than aftermarket alternatives. Make sure to factor this into your budget.

2. Availability: Depending on your location, the specific part may not be readily available at local auto parts stores. You may need to order it online or wait for it to be shipped.

3. Potential for scratching or damaging the new part during installation: Care must be taken during installation to avoid causing any scratches or damage to the new bumper bar.

If you're looking to maintain your 1968 Chevrolet's original appearance and want a bumper bar that is built to last, then purchasing the 68cc1-1b2-b front bumper bar is a good choice. Although it may be more expensive than some aftermarket alternatives, the long-term benefits of having an OEM part can outweigh the cost. Just be prepared for potential shipping delays and careful installation to protect the new part.

If you're unsure about the installation process or would like to have peace of mind, consider hiring a professional mechanic to install the part for you. This can ensure that the bumper bar is installed correctly and protect your vehicle from any potential damage during the installation process.

Details:

Rear brake proportioning valve brakes, braking, assembly, Assam, Assam end cap guard, reinforcement, bumper valance, cab clip carburetor pillar clock clutch master cylinder complete vehicles for sale console cowl vent panel crank cam angle sensor crankshaft cruise speed regulator block head dash assembly wiring harness deck lid tailgate distributor side, back handle outer hinge, lock solenoid molding, mirror window regulator, crank, motor erg maintenance reminder electric seat belt track electrical parts, misc.

All our listings from this point downward are the same:attention.

This usually includes USPS and fed-ex things like bumpers, fenders, trunk lids, etc.

There is a our time zone pacific. Cut off time is the day before at 5:00pm pacific.

Has some deeper surface scratches.

For example, if you live in Sweden.

Apps and very limiting do not show all the info that is usually viewed by a person at home computer.

Courier fee added to bus shipping cost pay for the transport from Orville Wenatchee depot by. Canadian buyers. No issues or troubles to mount on next vehicle and use as is.

Axle shaft spindle knuckle, stub, rear suspension strut back glass regulator backing plate, backup lamp bell housing belt pensioner blower motor body parts, misc USA twice a week each. Lower down in the listing on your phone or app see details to all pictures and info about parts.

The container is full of other peoples items as well. You can on hose to narrow down searches by main types. Body wiring harness brake anti lock parts caliper master cylinder parts, misc. Checked-inspected, guaranteed good.

The bus has a 100lb and 82 inch longest side maximum.

Large item shipping within USA that are too big for postal service: it is usually cheapest to ship these items by fed-ex ground or bus. Items like this are usually engines, axles, major large body sections.

This allows you to choose the cheapest shipping cost.

If the pricing is not correct for shipping please a price quote.

Front bumper bar - lower 1968 Chevrolet full size 68CC1-1B2-B the below grill.

Has some surface rust on backside.

Surface paint is aged and faded.

This will detail up nicer than rated. Handling costs. Re: cheaper shipping 1.

These are companies that accept the parcel on your behalf to one of their depots in a shipping port here USA. To obtain a bunch of quotes from different carriers at one time. Fed ex smart post and regular ground or home service.

For heavy items smaller its best to go in a flat rate medium or large box.

Slower most economical cheapest service for items within these sizes.

Interior sun visor jack tool kit license lamp misc.

Can be repainted to nicer.

Safely wrapped box shipping size is 71. Steering wheel sun roof motor panel suspension compressor x member k-frame tail finish gate molding lamp tailgate front deck lid temperature control throttle body valve assembly timing cover tire top section, rear torque converter transfer case transmission module trans axle trim panel, door trunk turbocharger supercharger vacuum pump water rim bearing, window defogger, washer motor, windshield frame reservoir wiper arm wire harness, moulding carpet headliner dash bezel ashtray glove box shiftier emergency brake e-brake glove box dome light clip bows trims a pillar cut air bag detector cleaner conditioner clutch condenser evaporator hoses wiring harness flow meter injection alternator automatic oil cooler axle assembly, 4wd carrier coil spring arm, lower Dana spicier corp Wagner Borg Warner upper drive shaft, hub outer locking independent leaf spring, loaded beam, 2wd parts, misc.

Or near Oslo's BC on Canadian side of the border. This has been happening since recent update.

Engine assembly mounts oil cooler parts, misc. 5 out of 10 cosmetically. Straight and true.

On the see details beside shipping price, or tab to different prices.

Has surface dings and some small impact marks.

We post as many can the shipping companies and are always changing their pricing rate scales.

Electrical switch panel switch, column electronic chassis control modules engine module parts, misc.

Brake parts, misc.

part #: 3907656 price

• $359.00

specifications vintagecarbumperus:

• for makes: Chevrolet
• for years: 1968
• mpn: 3907656
• part type: Bumper Bar Motor
• placement on vehicle: Front
• surface finish: Original Oem Gm Parts
• country/region of manufacture: United States

Returns vintagecarbumperus:

• policy: no returns

Offer vintagecarbumperus:

• best offer: false
• bids: 0
• Started: October 12, 2018, 12:25 pm
• quantity: 1
• Sold: 0

Payments vintagecarbumperus:

• PayPal

Seller vintagecarbumperus:

• city: Oroville, Washington
• zipcode: 98844

Ratings:

1. Great seller quick shipping part is just as listed 10-12-18
2. Very nice condition and carefully packaged - thank you! 10-12-18
3. quick delivery item as advertised 10-12-18
4. Positive transaction 10-12-18

General vintagecarbumperus:

• in stock: Yes
• condition: Used
• Motors > parts Accessories > vintage Car Truck Parts > exterior > bumpers

Shipping vintagecarbumperus:

• handling: 5 days
• type: Calculated

Chevrolet 3907656 Is Similar To:

• 1219 Danchuk Chevrolet Front Bumper Bracket Outer Drivers Side Fender To (39.1% similar) Please view pictures and ask any questions. Powder coated black. New in original package. It was sealed until I opened to take a better picture. For sale one dank brand 1955 chevrolet drivers side front fender to bumper bracket...(June 15th, 2018)
• 15678957 15678957 General Motors 1994 Chevrolet (49.6% similar) See pictures. Happy buying...(April 6th, 2017)
• 00377015 Chevrolet Nos Monte Carlo Front Bumper Unpacked For The First (47.4% similar) This one is no exception chevrolet Monte Carlo front bumper not just oem but nos as well. Unwrapped to list on. Note: while beautiful, factory bumpers were not show quality. Was sealed in factory wax coating as shown photo. Inventory card attached showing order date of note: this bumper does not ...(June 13th, 2018)
• 06-02 Chevrolet Corvette Center License Plate Bar (24.6% similar) It has just been re-chromed to like new quality with no pitting. Billy-bobs fast car this is an original front license plate bar off of a corvette...(April 11th, 2018)
• 0847-210b Key Parts Steel Bumper Filler Chevrolet Pickup Series Pain (51.1% similar) ...(August 26th, 2018)
• 0847-210c Key Parts Steel Bumper Filler Chevrolet Pickup Series Chro (51.1% similar) ...(May 29th, 2018)
• Front 100-3568 1968 Chevrolet Camaro Bumper (37% similar) Winning this offer does not entitle you to come inspect the part and decide if you want to buy it, but obligates you to complete the purchase. AMD part number 100 3568RKM vintage parts number please verify the application is correct for your vehicle. The bumpers are precision designed and stamped ...(November 18th, 2014)
• 10016848 General Motors Chevrolet El (57.4% similar) Beautiful rear show quality Eli amino bumper with impact strip. This isn't a cheap re pop...(May 16th, 2017)
• 10135973 Gm Chevrolet Corvette Front Bumper License Plate Filler (51.2% similar) ...(July 16th, 2018)
• 10448 Danchuk Chevy Front Chrome Bumper Bullet Guards Pair Chevrolet New (51.1% similar) One pair only at this price. This is for a new pair of 1957 chevrolet one-fifty series, two ten and Bela air chrome front bumper guard bullet pieces. These fit 1 piece and 5 front bumpers...(April 22nd, 2018)
• 1112e Mikes Chevrolet Gmc Truck Front Bumper Brackets Bolts (38.7% similar) This is a set of front bumper brackets for chevrolet truck 1970 and GMC trucks 4 piece 2 wheel drive only...(August 2nd, 2018)