BMW 51117471518 Front Bumper Right Air Inlet Bezel G21 132

( Manufacturer Part Number: 51117471518 ), ( Type: Air Inlet Finisher, Right ), ( Placement On Vehicle: Front, Lower, Right ), ( Country Of Origin: Germany )

Review BMW Series G21 Front Bumper Right Air Inlet Bezel #132 fits G20 330I 330E 2019–2022

The **BMW 51117471518 (2019 2022 G20/G21 330i/330e Front Bumper Right Air Inlet Bezel Part #132)** is a precision-engineered aftermarket component designed to seamlessly restore the factory aesthetic and functionality of the right-hand side air inlet bezel on BMW s fifth-generation 3 Series (G20) and 4 Series Gran Coupe (G21) models. This part is meticulously crafted to match the exact dimensions, contours, and styling cues of the original equipment manufacturer (OEM) component, ensuring a flawless fitment that blends seamlessly with the front bumper assembly. Engineered from high-quality, durable materials likely a blend of reinforced polycarbonate or ABS with UV-resistant coatings the bezel is built to withstand environmental stressors, including exposure to sunlight, moisture, and minor impacts, while maintaining its crisp, matte-black or color-matched finish depending on the vehicle s trim level. The design incorporates subtle, BMW-specific styling details such as the precise contouring around the air intake slot and the integrated rubber gasket, which not only enhances the visual appeal but also ensures a tight seal to prevent drafts and road debris from entering the cabin. Whether installed during a full front-end restoration or as part of a targeted cosmetic upgrade, this bezel is an essential component for maintaining the 330i or 330e s sporty, aerodynamic profile while preserving the vehicle s resale value and curb appeal. Its compatibility extends across the entire 2019 2022 model range, accommodating variations in trim levels, including the M Sport, xDrive, and iPerformance editions, making it a versatile solution for both enthusiasts and professional installers alike.

### **Pros and Cons of buying a BMW 51117471518 (2019-2022 G20/G21 330i/330e Front Bumper Right Air Inlet Bezel Part No. 132)**

This part is a **front bumper right air inlet bezel** for the **BMW G20 (5 Series Touring) and G21 (5 Series Gran Turismo)** models, specifically for the **2019-2022 330i and 330e** variants. Below is a detailed analysis of its advantages and disadvantages, followed by a conclusion and recommendation.

---

### **Pros**

1. **OEM Quality and Fit**

- This is an **original BMW part**, meaning it is designed to match the exact specifications of the manufacturer. It should fit perfectly without modifications, ensuring proper alignment with the bumper and air inlet system.

- The material and construction align with BMW s standards, reducing the risk of premature wear or misalignment issues that can occur with aftermarket knockoffs.

2. **Aesthetic Consistency**

- The bezel contributes to the **visual uniformity** of the front bumper, maintaining the car s factory appearance. A damaged or missing bezel can make the bumper look incomplete or mismatched.

- For owners who prioritize **resale value and curb appeal**, an OEM replacement ensures the vehicle looks like it was never repaired.

3. **Functionality and Safety**

- The air inlet bezel plays a role in **aerodynamics and cooling efficiency**, particularly for the engine bay. A properly fitted bezel ensures optimal airflow, which is critical for performance and thermal management.

- Unlike some aftermarket parts that may not seal correctly, an OEM bezel reduces the risk of **air leaks or debris entering sensitive components**.

4. **Warranty and Reliability**

- Purchasing from an **authorized BMW dealer or a reputable BMW parts supplier** (e.g., BMW Approved, Mopar, or official online retailers) often comes with a **limited warranty**, typically covering defects in materials and workmanship.

- OEM parts are less likely to fail prematurely compared to cheaper alternatives, reducing the need for frequent replacements.

5. **Compatibility with Other Systems**

- The bezel may integrate with **lighting, sensors, or structural components** of the bumper. An OEM part ensures compatibility with these systems, avoiding potential malfunctions or misalignments.

- For example, some bumpers include **daytime running lights (DRLs)** or **parking sensors**, and a mismatched bezel could interfere with their operation.

6. **Resale Value Preservation**

- BMWs hold their value well, but **visible repairs or non-OEM modifications** can deter potential buyers. Using an OEM part ensures the vehicle remains in pristine condition, which is beneficial if you plan to sell or trade it in the future.

7. **Ease of Installation**

- OEM parts are designed to be installed by **BMW-trained technicians** or even by experienced DIYers with the right tools. The part includes all necessary hardware (e.g., clips, screws) for a secure fit.

- Unlike some aftermarket parts that may require additional modifications (e.g., drilling, cutting), an OEM bezel should install straightforwardly.

---

### **Cons**

1. **High Cost**

- OEM BMW parts are **significantly more expensive** than aftermarket alternatives. The price of this bezel (part no. 132) can range from **$200 to $400 **, depending on the supplier and any additional labor costs.

- For budget-conscious buyers, this may be a **major drawback**, especially if the damage is minor or if the part is no longer needed due to a different repair strategy (e.g., replacing the entire bumper).

2. **Longer Wait Times**

- OEM parts, especially for popular models like the 5 Series, may have **extended lead times** due to demand. Authorized dealers and official online stores often require **1-4 weeks** for delivery, which can delay repairs.

- Aftermarket suppliers may offer faster turnaround times but with varying quality.

3. **Potential for Overkill**

- If the damage to the bezel is **cosmetic only** (e.g., a small chip or scratch), some owners may opt for **repair kits or touch-up paint** instead of a full replacement. In such cases, replacing the entire bezel could be **unnecessary expense**.

- For **minor dents or cracks**, a professional bumper repair shop might offer a more cost-effective solution.

4. **Limited Customization**

- Unlike aftermarket parts, OEM bezzles do not offer **color variations, unique designs, or performance upgrades**. If you re looking to **personalize your BMW**, aftermarket options may provide more flexibility.

- However, for most owners, customization is not a priority, and OEM parts suffice.

5. **Potential for Counterfeit Parts**

- When purchasing from **unauthorized sellers** (e.g., eBay, Craigslist, or unscrupulous online marketplaces), there is a risk of receiving **counterfeit OEM parts**. These may look identical but fail to meet BMW s quality standards, leading to **poor fit, early wear, or safety concerns**.

- Always verify the seller s authenticity (e.g., BMW Approved, Mopar, or official dealership parts departments).

6. **Environmental and Ethical Concerns**

- OEM parts contribute to **electronic waste** if not recycled properly. While this is a minor concern for individual purchases, it s worth noting for those who prioritize sustainability.

- Some aftermarket suppliers offer **recycled or eco-friendly alternatives**, though these are rare for high-end parts like this.

7. **Labor Costs**

- While the part itself is expensive, **installation labor** at an authorized BMW dealership can add **$100 $300 ** to the total cost. Independent mechanics may charge less, but the quality of work may vary.

- DIY installation is possible but requires **precision and access to BMW-specific tools**, which may not be available to everyone.

---

### **Conclusion**

The **BMW 51117471518 (2019-2022 G20/G21 330i/330e front bumper right air inlet bezel part no. 132)** is a **high-quality, OEM replacement part** that ensures **perfect fit, functionality, and aesthetic consistency** for your vehicle. It is the **best choice for owners who prioritize reliability, resale value, and long-term durability**, especially if the damage is significant or structural.

However, the **high cost, potential wait times, and lack of customization** make it less ideal for **budget-conscious buyers or those seeking minor repairs**. If the damage is purely cosmetic or if you re open to alternatives, **aftermarket parts or professional bumper repair services** could be more economical solutions.

For most **serious BMW owners**, the **pros outweigh the cons**, as the **peace of mind, warranty coverage, and OEM quality** justify the expense. If you re unsure, consulting a **BMW technician** can help determine whether replacement is necessary or if a cheaper alternative exists.

---

### **Recommendation**

- The damage is **structural, functional, or visually significant**.

- You want to **maintain the vehicle s value and factory appearance**.

- You re **repairing a bumper replacement or a major front-end overhaul**.

- You have **access to an authorized BMW dealer or trusted supplier** to avoid counterfeits.

- The damage is **minor (e.g., a small chip or scratch)** opt for a **touch-up kit or professional bumper repair**.

- You re on a **tight budget** explore **aftermarket parts from reputable brands** (e.g., ACDelco, Dorman, or BMW-approved aftermarket suppliers like **Mopar or Euro Car Parts**).

- You re **not planning to sell the car soon** and can live with a temporary fix.

- **Authorized BMW Dealership** (most reliable, but expensive).

- **BMW Approved Online Retailers** (e.g., **BMW Parts Store, Mopar, or Euro Car Parts**).

- **Reputable Aftermarket Suppliers** (e.g., **ACDelco, Dorman, or local BMW specialty shops**).

- **Avoid** unknown sellers on eBay, Facebook Marketplace, or untrusted websites to prevent counterfeit parts.

- If comfortable with mechanics, **DIY installation** is possible with the right tools.

- For **best results**, have a **BMW-trained technician** perform the installation, especially if the bumper or surrounding components are being replaced.

**Final Verdict:** For most owners, the **OEM bezel is the best long-term investment**, but weigh the cost against the severity of the damage and your budget. If in doubt, consult a professional to assess whether replacement is truly necessary.

Details:

#132: Vehicle - sedan, 2019 -22, shadow line;right: Trim Levels Base Fits: 330E 2021 -2022. 330I drive 2019 -2022. 330I 2019 -2022. 330E drive 2021 -2022.

part #: 51117471518 prices

• $22.77-$40.47

specifications vintagecarbumperus:

• for models: G20, 330i, 330e
• for makes: Bmw
• for years: 2019-2022
• mpn: 51117471518
• type: Air Inlet Finisher, Right
• placement on vehicle: Front, Lower, Right
• country of origin: Germany

returns vintagecarbumperus:

• time: 30 Days
• policy: Returns Accepted
• paid by: Seller

offer vintagecarbumperus:

• best offers: True
• quantity: 1
• availability: In Stock
• sold: 0
• options: Ship-to-home
• started: March 4, 2026

shipping vintagecarbumperus:

• transit: 3-7 Days
• cost: $14.99
• type: Fixed
• service: Standard
• class: Standard

general vintagecarbumperus:

• Exterior Parts Accessories > Bumpers Components > Bumper Inserts Covers
• condition: New other see details

seller vintagecarbumperus:

• city: Linden, New Jersey
• # reviews: 23361
• rating: 99.9%

payments vintagecarbumperus:

• credit card: Visa
• other
• wallet: Google-pay

Bmw 51117471518 Is Similar To:

• 51111815795 Bmw 2002 2002tii Front (34.9% similar) Brand new, oem bmw front left and right bumper corners 5...(October 1st, 2017)
• 51111831633 51111831634 Bmw Front Bumper Shock Covers (38.6% similar) I try to answer quickly. I'm including what mounting parts I saved with these when they were taken off. Removed from a car 20 years ago, stored in cool dry storage since. Please look at the pictures and ask questions before buying. One cover has a little kink on the lower edge that could be made ...(October 21st, 2018)
• Late 51111953097 Oem E30 Front Model Bmw Mount Bumper Brackets 51111953098 (38.6% similar) Bmw E30 oem front bumper mount brackets late model only. For plastic bumpers...(December 20th, 2014)
• 51115470016 Bmw Pair Of Bumper (31.1% similar) The photo of merchandise is always actual. It should fit all bmw E10 16 1600TI, 1602, 2002 TI, 2002 , I have a number of parts left over from various car restorations that i'll be listing this month. They are in very nice shape. This is a pair of front bumper over riders rubber pads for 2002 E10...(January 13th, 2018)
• 51115670000 Bmw 2002 Front Bumper (36.8% similar) All together this would retail at 1,250 new. Bmw 2002 oem factory original front bumper including the center, left, right, and associated left right trim pieces...(September 16th, 2017)
• Cap 08-11 51117056947 Lh Bmw Front Eye Cover Bumper Oem Washer Headlight 525 545 (34.9% similar) Unfinished need painted good condition...(February 22nd, 2015)
• Oem 525 Rh Cover Bmw 08-11 545 Bumper Cap Headlight Eye Washer 51117056948 Front (26.7% similar) Unfinished need painted good condition...(February 22nd, 2015)
• 2011 51117200717 Bumper Oem Bmw Cover 2012 7200717 Tow Front Cap Series 2013 5 F10 (27.6% similar) ...(November 11th, 2014)
• 5111805649210503410 Bmw Sport Front Bumper Oem (37.7% similar) Condition the bumper is in good condition, all tabs are intact...(December 12th, 2018)
• 3.0si Bumper Rear 51121831001 51121831002 E3 Bmw Pieces 3.0 3.0s Sedan Filler 2 Bavaria (21.2% similar) You are buying on a set left right rear bumper us. Specification rubber filler pieces with the metal mounting bracket for the bmw e3 0SI sedan bmw part number also take a look at my other offers. 0s sedan, 0s Bavaria...(September 5th, 2014)
• Bumper Nla Rubber Rear Center 51121836689 Trim E12 Bmw Nos Rare Section (18.4% similar) This is a new old stock piece and has never been mounted on a vehicle. This is a rare early E12 5 series rear bumper covering. This piece is currently no longer available through bmw. The rubber is in excellent condition...(November 20th, 2014)