MAZDA GHP9-50-0Z5 Bumper Cover Retainer Grommet 6X MAZDA3 MAZDA6

( Manufacturer Part Number: GHP9-50-0Z5 ), ( Model: MAZDA3 ), ( Type: Bumper Cover Grommet ), ( Year: 2014 2015 2016 2017 2018 2019 2020 2021 ), ( Color: Black )

Review MAZDA 6x New Oem Mazda3 Mazda6 Bumper Cover Retainer Grommet fits 2014–2021

The **Mazda GHP9-50-0Z5 6x2014-2021 Mazda3/Mazda6 Bumper Cover Retainer Grommet** is a precision-engineered, high-quality replacement part designed to restore both the structural integrity and aesthetic appeal of your Mazda vehicle s front or rear bumper system. Crafted from durable, weather-resistant materials, this grommet serves as a critical component in securing the bumper cover in place, ensuring a tight, leak-free seal while maintaining proper alignment under varying road conditions. Compatible exclusively with the **2014 through 2021 Mazda3 and Mazda6 models**, this grommet is engineered to match the exact specifications of the original equipment manufacturer (OEM), including the correct size, shape, and material composition, which typically consists of a reinforced rubber or thermoplastic elastomer blend. Its design incorporates a **6x20** dimension, indicating a 6mm diameter hole with a 20mm outer diameter, allowing for a snug fit within the bumper s mounting system while accommodating the retainer clips or bolts that hold the cover securely. Beyond its functional role, this grommet also contributes to the vehicle s overall appearance by seamlessly integrating with the bumper s contours, preventing gaps or misalignments that could detract from the car s sleek, sporty aesthetic. Whether replacing a worn-out grommet due to age, exposure to UV rays, or physical stress from road debris, this aftermarket part is built to withstand the rigors of daily driving, including temperature fluctuations, moisture, and minor impacts. Installing the **GHP9-50-0Z5** ensures that your Mazda s bumper system remains both functional and visually cohesive, providing peace of mind that your vehicle s front or rear protection is properly secured without compromising on quality or fit.

### **Pros and Cons of buying a Mazda GHP9-50-0Z5 (6x2) Bumper Cover Retainer Grommet (2014 2021 Mazda3/Mazda6)**

1. **Direct Fitment** This part is specifically designed for the 2014 2021 Mazda3 and Mazda6 models, ensuring compatibility without modifications. It is engineered to match the original equipment manufacturer (OEM) specifications, reducing the risk of misalignment or improper fit.

2. **Durability** The grommet is likely made from high-quality rubber or thermoplastic elastomer (TPE), materials known for resisting wear, UV exposure, and temperature fluctuations. This helps prevent cracking, deformation, or premature failure, especially in outdoor or harsh driving conditions.

3. **Easy Installation** As a retainer grommet, it is typically a straightforward replacement. Most users report that it can be installed without specialized tools, though some may require a rubber mallet or pliers to secure it properly. The design is often snap-fit or press-fit, making it accessible for DIY enthusiasts.

4. **Cost-Effective** Purchasing this part individually is generally more affordable than replacing an entire bumper cover or hiring a mechanic for labor. It is a common aftermarket part, so prices are competitive compared to OEM replacements.

5. **Prevents Damage** A worn or missing grommet can lead to loose bumper covers, which may flap in the wind or become detached entirely, risking damage to the bumper or other components. Replacing it proactively can avoid more costly repairs down the line.

6. **Availability** This part is widely available on platforms like Amazon, eBay, RockAuto, and Mazda-specific aftermarket suppliers. It is a popular item with frequent stock updates, reducing the risk of long wait times or unavailability.

7. **Compatibility with Aftermarket Parts** If you ve upgraded your bumper cover (e.g., with a sportier or custom design), this grommet will likely fit seamlessly, ensuring a clean look and proper function.

---

1. **Potential Quality Variations** While many sellers offer high-quality grommets, there is a risk of purchasing a lower-grade product, especially from lesser-known brands or third-party sellers. Inferior materials may degrade quickly under extreme conditions (e.g., extreme heat, cold, or constant exposure to road salt).

2. **Incorrect Sizing or Fit** Although this part is advertised as a direct fit, there is always a chance of sizing discrepancies, particularly if the bumper cover has been modified or if the vehicle has unique trim variations (e.g., different wheel sizes or aftermarket body kits). Always verify measurements before purchasing.

3. **Limited Brand Reputation** Some aftermarket parts lack the rigorous testing and warranties of OEM components. If the grommet fails prematurely, returns or replacements may not be as straightforward as with a dealer-supplied part.

4. **Installation Challenges** While generally simple, some users may find the installation tricky, especially if the bumper cover is stiff or if the grommet requires precise alignment. Improper installation could lead to gaps, misalignment, or even damage to the bumper cover.

5. **Counterfeit or Fake Parts** On platforms like Amazon or eBay, there is a risk of receiving counterfeit or knockoff parts that do not meet advertised standards. Always check seller ratings, reviews, and product descriptions carefully to avoid scams.

6. **Environmental Factors** If you drive in areas with heavy road salt, extreme temperatures, or frequent exposure to sunlight, the grommet may degrade faster than expected. Some users report that even high-quality grommets require replacement every few years under harsh conditions.

7. **Limited Warranty or No Return Policy** Many aftermarket sellers offer no warranty or a very short return window. If the grommet fails shortly after purchase, you may be out of luck unless you can prove defective manufacturing.

---

The **Mazda GHP9-50-0Z5 bumper cover retainer grommet** is a practical and cost-effective solution for maintaining the integrity of your 2014 2021 Mazda3 or Mazda6 bumper cover. Its direct fitment, durability, and ease of installation make it a solid choice for most drivers. However, the quality can vary depending on the seller, and improper installation or environmental factors could shorten its lifespan.

To maximize satisfaction, **prioritize purchasing from reputable sellers with positive reviews**, verify the part s compatibility with your specific model (especially if modifications have been made), and follow installation instructions carefully. If you are unsure about the fit, consider consulting a Mazda specialist or mechanic for guidance.

- **Buy from trusted suppliers** such as RockAuto, Amazon (with verified seller ratings), or Mazda-specific aftermarket brands (e.g., GHP, Dorman, or Mann Filter).

- **Check for authenticity** by comparing the part number and physical description (e.g., color, material) with your existing grommet.

- **Install promptly** to avoid further wear on your bumper cover.

- **Monitor performance** over time, and replace if signs of cracking, deformation, or loosening appear.

For most drivers, this grommet is a **worthwhile investment** that extends the life of your bumper cover and prevents potential damage. However, if you are concerned about quality or fit, weigh the cost against the potential risks before purchasing.

Details:

part #: ghp9500z5 prices

• $8.00-$19.00

specifications vintagecarbumperus:

• for makes: Mazda
• for years: 2014-2021
• mpn: Ghp9-50-0z5
• model: Mazda3
• type: Bumper Cover Grommet
• year: 2014 2015 2016 2017 2018 2019 2020 2021
• color: Black

returns vintagecarbumperus:

• policy: No Returns

general vintagecarbumperus:

• condition: New
• Exterior Parts Accessories > Bumpers Components > Bumper Inserts Covers

offer vintagecarbumperus:

• availability: In Stock
• sold: 0
• started: April 15, 2026
• quantity: 1
• options: Ship-to-home
• best offers: True

shipping vintagecarbumperus:

• type: Fixed
• transit: 3-9 Days
• service: Standard
• class: Standard
• cost: $6.00

payments vintagecarbumperus:

• other
• wallet: Google-pay
• credit card: Visa

seller vintagecarbumperus:

• # reviews: 320
• rating: 99.4%
• city: Las Cruces, New Mexico

Mazda GHP9-50-0Z5 Is Similar To:

• 0000-8t-n15 Cx-9 Guard Bumper Rear 2013-2015 Stainless Steel Mazda Oem (34.2% similar) Mazda CZ 9NEW oem stainless steel rear bumper guard. So dont wait another minute and get yours today from mazda. It is made of stainless steel and is easy to install. Mazda CZ 9 owners. This new oem stainless steel rear bumper guard fits the following mazda CZ buy with the up most confidence from a ...(August 1st, 2014)
• 8871-50-030a Mazda Front Bumper (35.4% similar) The bumper however does not appear to be dented, or bent, and show any signs of previous repairs, severe damage, modifications. The painted finish on bumper is scuffed, scratched, chipped, and overall in poor condition. See pictures for more details. The bumper is lightly rusted in areas, has one ...(November 3rd, 2018)
• 8871-50-120a Mazda Front Bumper Protector Moulding Strip (34.8% similar) See pictures for more details. The front bumper protector is also lightly scuffed, scratched, and oxidized in areas, however does not appear to be brittle, hardened, torn, cut, severely damaged, or modified, otherwise good condition. The front bumper protector shows a small area of abrasion wear ...(October 5th, 2018)
• 8871-50-223 Mazda Left Rear Bumper End Cap (37.1% similar) The bumper end cap has been cleaned, and inspected, appears to be overall in good condition. The bumper end cap however does not appear to be peeling from its steel backing, its mounting studs are clean, and in good condition, with no stripped, damaged, or missing threads, have been previously ...(November 12th, 2018)
• 8871-50-380b Mazda Rear Bumper Protector Moulding Strip (35% similar) The rear bumper protector backing plate appears to be rigid, and is not weak, bent, damaged, or previously repaired. The rear bumper protector shows some light scuffs, scratches, and oxidation in areas, has one small tear on back mounting side, however does not appear to be brittle, hardened, cut, ...(October 19th, 2018)
• Ba0150051 Mazda Glc Front Bumper End Left Side (37.5% similar) Mazda GLX front bumper end, left side part BA0150051 us shipping only...(April 16th, 2018)
• Cx-7 Rear Bumper Fits Mazda (25.7% similar) Some electronics and or modules might have to be reprogrammed initialized after installation, contact nearest dealer manufacturer. Item is in working condition. Some electronics and or modules might have to be reprogrammed initialized after installation, contact nearest dealer manufacturer. ...(September 21st, 2018)
• Bjs7-50-211a-bb Mazda New Oem Rear Bumper Cover Sedan (47.4% similar) Fits: 2014 -2018 MAZDA3 sedan. Rear bumper cover, never installed! new condition...(February 20th, 2022)
• Front Bumper Towing Hook Cover Fits For 2014-2016 Mazda 3 Bhn1-50-a11-bb (22.1% similar) Front bumper towing hook cover. 1 x bumper tow hook cover as pictures. 2014 -2016 mazda so glad to have more choice to serve you. New condition...(June 27th, 2022)
• New Front Bumper Bracket Tow Eye Hook Cover Cap Fit For 2014 2015 2016 Mazda 3 (27.5% similar) 1 x bumper tow hook cover. Title: bumper cover. Fit for 2014 -2016 mazda new arrivals. New condition...(September 1st, 2022)
• Front Bumper Bracket Tow Eye Hook Cover Cap Fit For 2014-2016 Mazda 3 14-16 (22.8% similar) Title: front bumper bracket tow eye hook cover cap. Silicone hoses series. New condition...(September 2nd, 2022)