FORD W525157-S300 Bracket Rivet

( Manufacturer Part Number: W525157-S300 ), ( Part Type: Bracket ), ( Genuine Oem: Yes ), ( Warranty: 1 Year ), ( Fitment Type: Direct Replacement ), ( Parts Included: Only Part Reference 6 On The Diagram Is Included ), ( Replaces Part Number: W525106s427 )

Review FORD Genuine Side Bracket Rivet

The **Ford W525157-S300 Bracket Rivet** is a precision-engineered fasteners component specifically designed for use in Ford vehicle applications, particularly within the suspension and steering systems of select models. This high-quality rivet is crafted from durable, heat-treated steel, ensuring exceptional strength and resistance to fatigue, vibration, and environmental stressors such as moisture, road salt, and temperature fluctuations. The rivet features a **snap-tite or blind rivet design**, allowing for easy installation in tight or hard-to-reach areas without the need for access from both sides a critical advantage in automotive repairs where space and tooling constraints are common. Its **smooth, polished finish** minimizes the risk of corrosion, while the **precision-machined head** ensures a secure, flush fit, preventing interference with adjacent components. This rivet is engineered to maintain structural integrity under dynamic loads, making it ideal for applications where suspension alignment, steering stability, and long-term durability are paramount. Whether replacing a worn-out rivet in a control arm, sway bar, or other suspension linkage, this part is built to meet Ford s rigorous engineering standards, providing a reliable, long-lasting solution that helps restore both performance and safety to the vehicle.

### **Pros and Cons of buying a Ford W525157-S300 Bracket Rivet**

1. **Direct Fitment** This part is specifically designed for Ford vehicles, ensuring compatibility with the intended application (likely for the S300 engine or related components). It reduces the risk of misalignment or improper installation compared to generic alternatives.

2. **Durability** Rivets are often used in high-stress applications where bolts or screws might loosen over time. A properly installed rivet can provide a permanent, vibration-resistant connection, which is ideal for under-the-hood or structural components.

3. **Cost-Effective for Bulk or Repairs** If you re performing a repair or replacement, purchasing the correct rivet upfront can save money compared to buying a full bracket or assembly that may already include rivets.

4. **Easy Installation** Rivets are relatively simple to install with basic tools (e.g., a rivet gun or manual riveting tool). No special expertise is required, making them a practical choice for DIYers.

5. **Prevents Corrosion** Unlike bolts, which can rust or corrode over time, rivets create a sealed joint that reduces exposure to moisture and contaminants, extending the lifespan of the connected parts.

6. **Weight Savings** In some applications (e.g., engine mounts or suspension components), rivets can be lighter than bolts, contributing to overall weight reduction without compromising strength.

7. **OEM Quality** If this is an original equipment manufacturer (OEM) part or a high-quality aftermarket equivalent, it should meet the same standards as the factory-installed rivet, ensuring reliability.

---

1. **Permanent Connection** Once installed, rivets cannot be removed or adjusted without damaging the part. This can be problematic if alignment or fitment issues arise after installation.

2. **Limited Availability** Rivets may not be as commonly stocked as bolts or screws, requiring special ordering or sourcing from automotive specialty suppliers. This could delay repairs if the part is not readily available.

3. **Tool Dependency** Installing rivets requires the right tooling (e.g., a rivet gun, hydraulic press, or manual riveter). Without these tools, the job may be impractical or require outsourcing to a professional.

4. **Potential for Over-Riveting** Improper installation (e.g., over-tightening) can cause the rivet to shear or deform, weakening the joint. This requires careful attention to the manufacturer s specifications.

5. **Not Suitable for Adjustable Applications** If the bracket or component needs periodic disassembly (e.g., for maintenance or replacement), rivets are not ideal. Bolts or quick-release mechanisms would be more practical.

6. **Cost for Specialty Parts** While individual rivets may be inexpensive, if the application requires multiple rivets or a specific type (e.g., blind rivets, solid rivets), the cumulative cost could add up, especially for high-end or rare parts.

7. **Risk of Counterfeit Parts** Like many OEM or aftermarket components, there is a chance of purchasing a low-quality or fake rivet. Buying from reputable suppliers (e.g., RockAuto, Dorman, or Ford-authorized dealers) mitigates this risk but adds to the cost.

---

The **Ford W525157-S300 bracket rivet** is a practical choice for applications where a **permanent, vibration-resistant, and corrosion-resistant** connection is needed. It excels in durability and direct fitment but is less flexible than bolted connections. The decision to purchase it depends on your specific needs:

- You need a permanent fix for a bracket, engine mount, or structural component.

- You have the right tools for installation and are comfortable with a non-reversible connection.

- The part is readily available from a trusted supplier.

- You prioritize long-term reliability over adjustability.

- The application requires frequent disassembly (e.g., for maintenance or repairs).

- You lack the tools or experience to install rivets correctly.

- You re unsure about the part s authenticity or compatibility with your vehicle.

- Bolts or alternative fasteners would be more practical for your use case.

---

If this rivet is **genuine OEM or from a well-reviewed aftermarket brand** (e.g., Dorman, Fel-Pro, or Ford Performance Parts), proceed with purchase if you re confident in your installation skills. For critical applications (e.g., engine mounts or safety-related components), consider consulting a mechanic to ensure proper fitment and tooling.

If you re unsure about the rivet s necessity, evaluate whether a **bolt-and-nut alternative** or a **pre-assembled bracket** would serve your needs better. Always cross-reference the part number with your vehicle s service manual to confirm compatibility.

For long-term reliability, prioritize **quality over cost** cheap or counterfeit rivets may fail prematurely, leading to more extensive (and costly) repairs. When in doubt, opt for a supplier with strong return policies or warranties.

Details:

Parts must be resalable and in the original packaging. Electrical parts are not returnable. Shipping Carrier substitutions may be made at our determination in an attempt to reduce shipping cost the customer. You've come to the right place.

part #: w525157s300 prices

• $10.99-$14.99

specifications vintagecarbumperus:

• for makes: Ford
• mpn: W525157-s300
• part type: Bracket
• genuine oem: Yes
• warranty: 1 Year
• fitment type: Direct Replacement
• parts included: Only Part Reference 6 On The Diagram Is Included
• replaces part number: W525106s427

offer vintagecarbumperus:

• sold: 0
• started: March 15, 2026
• availability: In Stock
• quantity: 4
• options: Ship-to-home

seller vintagecarbumperus:

• city: Conyers, Georgia
• rating: 96.7%
• # reviews: 179

general vintagecarbumperus:

• Exterior Parts Accessories > Bumpers Components > Bumper Inserts Covers
• condition: New

shipping vintagecarbumperus:

• service: Standard, Expedited
• transit: 4-8 Days
• class: Standard, Expedited
• cost: $0.00
• type: Fixed

returns vintagecarbumperus:

• paid by: Seller
• policy: Returns Accepted
• time: 30 Days

payments vintagecarbumperus:

• credit card: Diners-club
• wallet: Apple-pay
• other

Ford W525157-S300 Is Similar To:

• 3640d Dii Ford Mustang Rear Bumper Guards Mounting Bracket New (39.3% similar) This bracket is for your ford mustang. Ships to lower 48 states only. One pair of brand new rear bumper guard mounting bracket...(June 4th, 2018)
• 372434-fbk Scott Drake Mustang Parts Ford Front Bumper Bracket To Frame (31% similar) Ships to lower 48 states only. One pair of brand new front bumper bracket to frame bolt kit, this kit is for your ford mustang...(June 4th, 2018)
• 372434-rbk Scott Drake Mustang Parts Ford Rear Bumper Bracket To Frame (31.3% similar) One pair of brand new rear bumper bracket to frame bolt kit, this kit is for your ford mustang. Ships to lower 48 states only...(March 1st, 2018)
• D1zz-17a750-ar Scott Drake Mustang Parts Ford Rear Bumper Bracket Rh New (32.5% similar) Ships to lower 48 states only. One brand new right-hand rear bumper bracket. This bracket is for your ford mustang...(April 16th, 2018)
• D1zz-17a751-ar Scott Drake Mustang Parts Ford Rear Bumper Bracket Lh New (30.8% similar) This bracket is for your ford mustang. One brand new left-hand rear bumper bracket. Ships to lower 48 states only...(April 16th, 2018)
• 09a7043500 Oem Genuine Ford 1940 (39.5% similar) Pretty good looking condition, couple Pitts, no lock cylinder. This is an original 1940 Merck trunk lid handle...(August 29th, 2017)
• 0a-17795 Ford Nos Car Bumper Bracket Custom Deluxe Right Rear Outer (37.8% similar) Nos ford car bumper bracket fits 1950 custom, deluxe not for wagon right rear outer bracket great condition, boxed...(April 7th, 2018)
• 16-54619-1 Macs Auto Parts Model Ford Front Bumper Mounting Bracket Set (34.8% similar) These are plain steel and will need to be painted. Some minor fitting of brackets may be necessary. Do a full fitting before painting or powder-coating the brackets...(June 22nd, 2018)
• 16-54624-1 Macs Auto Parts Model Ford Rear Bumper Mounting Bracket Set (35.1% similar) This set for the rear full bar bumper contains 2 pieces and fits all body styles. Some minor fitting of brackets may be necessary. These are plain steel and will need to be painted. Do a full fitting before painting the brackets. These are plain steel and will need to be painted...(September 16th, 2018)
• 16-56186-1 Model Ford Trunk Deck Lid Support Bracket Roadster Eckler (37.5% similar) This bracket holds the deck lid open, and fits a roadster only...(September 2nd, 2018)
• Ad 1955-59 Mercury Bracket Read 17204-a Bumper 1013102 Ford Part Nos Lincoln (33.3% similar) Sorry I will no longer combine shipping. I do not guarantee the part to fit your application. And it is stamped I ship ups ground or USPS priority for domestic sales. Has never been installed. Shipping is not negotiable. Shipping is not negotiable. I cannot see your vehicle to compare. I am not ...(November 17th, 2014)