MOPAR 68295601AC Sensor Mounting Bracket

( Manufacturer Part Number: 68295601AC ), ( Part Type: Bracket Sensor Mounting ), ( Genuine Oem: Yes ), ( Warranty: 1 Year ), ( Fitment Type: Direct Replacement ), ( Make: Jeep ), ( Year: 2018 2019 2020 2021 2022 2023 2024 2025 2026 ), ( Parts Included: Only Part Reference 25 On The Diagram Is Included ), ( Replaces Part Number: 68295601aa, 68295601ab )

Review MOPAR Genuine Sensor Mounting Bracket fits WRANGLER 2018–2026

The **Mopar 68295601AC Sensor Mounting Bracket** is a precision-engineered component designed to ensure optimal performance and reliability in modern Chrysler, Dodge, Jeep, and Ram vehicles equipped with advanced engine management systems. This high-quality bracket serves as a critical mounting interface for the Mass Air Flow (MAF) sensor, a vital component that monitors the amount of air entering the engine, allowing the vehicle s Electronic Control Module (ECM) to calculate the precise fuel injection requirements for efficient combustion. Crafted from durable, heat-resistant materials, the bracket is engineered to withstand the demanding conditions of under-the-hood environments, including exposure to engine heat, vibrations, and road debris, while maintaining structural integrity over the long term.

The design of the **68295601AC bracket** reflects Mopar s commitment to compatibility and ease of installation, featuring precise dimensions and alignment points that match factory specifications exactly. Its robust construction prevents loosening or misalignment, which can lead to inaccurate sensor readings, reduced fuel efficiency, or even engine performance issues. The bracket s secure fit ensures that the MAF sensor remains properly positioned, allowing for consistent airflow measurement and reliable engine operation. Whether installed during routine maintenance or as part of a sensor replacement, this bracket guarantees a snug, interference-free attachment, minimizing the risk of rattles or improper sensor function.

Beyond its functional benefits, the **Mopar 68295601AC Sensor Mounting Bracket** exemplifies the brand s dedication to quality and engineering excellence. It is built to meet or exceed OEM standards, providing the same level of durability and performance as the original equipment part. Whether used in high-performance applications or everyday driving scenarios, this bracket ensures that the MAF sensor operates at peak efficiency, contributing to smoother acceleration, improved throttle response, and overall engine health. For vehicle owners and mechanics seeking a dependable, long-lasting solution, the **68295601AC** is an essential component that bridges the gap between sensor technology and reliable automotive performance.

The **Mopar 68295601AC sensor mounting bracket** is a part commonly used in Chrysler, Dodge, and Jeep vehicles, particularly those with the 5.7L or 6.1L Hemi engine. Below is a detailed breakdown of its pros and cons, followed by a conclusion and recommendation.

---

### **Pros of buying a Mopar 68295601AC Sensor Mounting Bracket**

1. **OEM Quality and Reliability**

The part is manufactured by Mopar, Chrysler s official parts division, ensuring it meets the same quality standards as the original equipment manufacturer (OEM) component. This reduces the risk of premature failure or compatibility issues.

2. **Direct Fitment**

The bracket is designed specifically for certain Chrysler, Dodge, and Jeep models, ensuring a precise fit without modifications. This minimizes installation challenges and reduces the likelihood of misalignment or improper seating.

3. **Compatibility with Aftermarket Sensors**

If you are replacing a faulty sensor (e.g., MAF, IAT, or crankshaft position sensor) and need the mounting bracket separately, this part will work seamlessly with aftermarket sensors that require the same mounting interface.

4. **Durability**

Mopar parts are built to withstand the conditions under which they operate, including exposure to heat, vibration, and engine fluids. This longevity can save you from repeated replacements.

5. **Warranty Coverage**

Mopar parts often come with a warranty (typically 12 months or 12,000 miles), providing peace of mind in case of defects or early failure. This is particularly useful if the part is critical to engine performance or emissions compliance.

6. **Ease of Installation**

Since it is an OEM part, it is designed to be installed using standard tools and procedures. Many users report that the installation process is straightforward, especially if you have experience working on similar engine components.

7. **Support for Emissions and Performance**

In some cases, the bracket may be part of an emissions-related system (e.g., supporting a mass airflow sensor or oxygen sensor). Using an OEM part ensures compliance with emissions standards, which is important for passing inspections or maintaining warranty coverage on the vehicle.

---

### **Cons of buying a Mopar 68295601AC Sensor Mounting Bracket**

1. **Higher Cost Compared to Aftermarket Alternatives**

Mopar parts are generally more expensive than aftermarket equivalents. If your primary concern is cost savings, you may find cheaper alternatives from third-party manufacturers that claim compatibility. However, these may not always match the quality or longevity of an OEM part.

2. **Potential Overkill for Minor Repairs**

If the bracket itself is not the root cause of your issue (e.g., you re replacing a sensor but the bracket is still functional), purchasing this part may be unnecessary. In such cases, a more budget-friendly solution (like a universal bracket or a partial kit) might suffice.

3. **Limited Availability in Some Regions**

Depending on where you purchase the part, availability can be an issue. Mopar parts may not be stocked at every auto parts store, and online retailers might have longer shipping times compared to aftermarket options that are widely available.

4. **Mixed Reviews on Aftermarket Substitutes**

While Mopar is reliable, some users report that aftermarket brackets even from reputable brands can sometimes be slightly misaligned or poorly machined. This could lead to installation difficulties or sensor misalignment, potentially causing performance issues or check engine lights.

5. **Potential for Counterfeit Parts**

Purchasing online (especially from unverified sellers) carries a risk of receiving counterfeit Mopar parts. These may not function correctly and could void your vehicle s warranty or cause further damage. Always buy from authorized dealers or trusted retailers.

6. **Not Always Necessary for Sensor Replacement**

In some cases, the sensor itself may not require a new bracket. If the bracket is still in good condition, replacing only the sensor (and using the existing bracket) could be a more cost-effective solution.

---

### **Conclusion**

The **Mopar 68295601AC sensor mounting bracket** is a high-quality, reliable part that is ideal for those who prioritize OEM compatibility, durability, and warranty coverage. It is particularly valuable if you are replacing a sensor in a critical system (e.g., emissions, fuel injection) or if you want to ensure a perfect fit without compromising performance. The part s reliability often justifies its higher cost, especially for long-term use.

However, if your budget is tight or the bracket is not the primary issue, exploring aftermarket alternatives (with caution) or checking if the existing bracket can be reused may be more practical. Always verify the part s necessity before purchasing to avoid unnecessary expenses.

---

### **Recommendation**

- You are replacing a sensor and need a new bracket as part of the repair.

- You want OEM-quality assurance and warranty coverage.

- The bracket is damaged or worn, and you cannot reuse it.

- You are working on a vehicle where emissions compliance or performance is critical.

- The bracket is still functional, and you only need to replace the sensor.

- You are on a tight budget and can find a high-quality aftermarket bracket with good reviews.

- You are purchasing from an unverified seller, and you want to avoid counterfeit parts (stick to authorized dealers or reputable online retailers like RockAuto, Amazon, or local Mopar stores).

**Final Verdict:** For most users, the Mopar bracket is the best choice due to its reliability and fitment. However, always confirm the part s necessity and source it from a trusted provider to avoid issues.

Details:

Shipping Carrier substitutions may be made at our determination in an attempt to reduce shipping cost the customer. Parts must be resalable and in the original packaging. Electrical parts are not returnable.

part #: 68295601ac prices

• $7.62-$22.82

specifications vintagecarbumperus:

• for models: Wrangler
• for makes: Mopar
• for years: 2018-2026
• mpn: 68295601ac
• part type: Bracket Sensor Mounting
• genuine oem: Yes
• warranty: 1 Year
• fitment type: Direct Replacement
• make: Jeep
• year: 2018 2019 2020 2021 2022 2023 2024 2025 2026
• parts included: Only Part Reference 25 On The Diagram Is Included
• replaces part number: 68295601aa, 68295601ab

seller vintagecarbumperus:

• # reviews: 739
• rating: 99.1%
• city: Lithonia, Georgia

payments vintagecarbumperus:

• other
• credit card: Diners-club
• wallet: Google-pay

general vintagecarbumperus:

• Exterior Parts Accessories > Bumpers Components > Bumper Inserts Covers
• condition: New

offer vintagecarbumperus:

• started: May 14, 2026
• options: Ship-to-home
• quantity: 4
• availability: In Stock
• sold: 0

shipping vintagecarbumperus:

• type: Fixed
• service: Standard, Expedited
• class: Standard, Expedited
• transit: 5-12 Days
• cost: $0.00

returns vintagecarbumperus:

• policy: Returns Accepted
• time: 30 Days
• paid by: Seller

Mopar 68295601AC Is Similar To:

• 1370472 Mopar Nos Fog Lamp Mounting Brackets Part (49.5% similar) I'm not sure what years of cars these are correct for so please be application before purchase. The remaining pieces are all nos and in good new condition. This is not a complete kit what you see in the pictures get. Lot of miscellaneous new old stock fog lamp hardware for a Chrysler, deist, dodge, ...(August 20th, 2018)
• 1856119 Mopar Late Plymouth Nos Front Bumper Bracket Stabilizers Pair (35.9% similar) One new old stock pair of mopar front bumper outer bracket stabilizers as found on late 1958 Plymouth's. When only nos mopar will do. They are group a 3:00 position on the picture has aborted Sta and an arrow pointing to of these brackets that held in place by outer bumper bolts. Location br mb 1...(April 8th, 2018)
• 3722728 Nos Mopar Front Bumper Bracket Retainer 1974-1975 P N (33% similar) For sale is a nos mopar retainer bracket for an energy absorbing bumper...(September 6th, 2016)
• 2461365 Mopar Bumper Bracket Mount Brace Lh Chrysler (34% similar) Engine assembly mounts oil cooler parts, misc. Apps and very limiting do not show all the info that is usually viewed by a person at home computer. Safely wrapped box shipping size is 23. Bumper bracket mount brace - LHS Chrysler 65CW1-1B9-LE this offer listing is for: a driver side from 1965 . Fed...(October 15th, 2018)
• Mopar 69 71 68 Cuda 2856666 Charger Tag Bracket Plate License Front 70 72 (38% similar) This is mopar in very nice original condition. You are buying a front license plate bracket for a dodge charger or Plymouth barracuda. There is no damage and no rust pitting issues...(December 31st, 2014)
• 2856914 Mopar Front Bumper Bracket Mount Set To Frame Chrysler Imperial (30.3% similar) Front bumper bracket mount set to frame 1968 Chrysler imperial 68CI2-1B9-C this listing is for: - a good of brackets from 2DR crown coupe. To obtain a bunch of quotes from different carriers at one time. Fed ex smart post and regular ground or home service. Brake parts, misc. Interior sun visor ...(October 10th, 2018)
• Bumper Charger Front Nos Bracket 2962588 Mopar 70 (37.1% similar) This is in super nice nos condition and is just dirty from sitting. You are buying an nos right front outer bumper bracket for a 1970 dodge charger...(December 6th, 2014)
• 3045904 Nos Mopar Rear Bumper Bracket 1976 Aspen Volare P N (33.6% similar) For sale is a nos mopar rear bumper absorbed bracket. Be sure to bookmark our two sites, AGH590 Roeg pal, to see all of our listings...(April 25th, 2016)
• Bracket Rear Satellite Nos 1972-73 Pan 3445040 Coronet Floor Mopar (12.1% similar) For sale is a nos mopar rear floor pan support bracket. We became a victim of the 2009 Chrysler bankruptcy and bailout. Our Chrysler parts books indicate this is for a dodge coronet and Plymouth satellite...(February 4th, 2015)
• 34624211 34624210 1971 72 Charger Road Runner Gtx Satellite Mopar Rear Bumper Bracket Set (26.3% similar) This includes 2 door satellite, road runner, TX and all charger model's. A nice straight set of rear bumper brackets mounts for a 1971 and 1972 dodge and Plymouth b body. They are coated in rust prevention coating that can be painted over the correct satin black. There is no rust and they will ...(October 6th, 2015)
• 3464331 Mopar Original Front Bumper Left Inner Bracket Charger Se Super (37% similar) Most items are in their natural, original condition, some may be pressure cleaned or refinished. It is not bent, but does have surface rusting areas with some pitting, mostly where bolts up to the frame, which won't be seen when installed. Please review pictures carefully, read in full, and ask ...(March 14th, 2019)